Gps tracker Queclink GL300A

The GL300A is a battery powered GPS tracker that includes multiple working modes allowing frequent reports over longer timeframes. Ideal for use in the logistics and transportation sectors. The product has two built-in light sensors and one internal temperature/humidity sensor, thus is capable of continuously monitoring its environment.

Without reporting: 190 days (connected to network with GPS off)

1 minutes’ reporting: 10 days (locate every 20 seconds, GPS on)

5 minutes’ reporting: 65 days

10 minutes’ reporting: 95 days

Κωδικός προϊόντος: gl300-bat-kit-1 Κατηγορία: Gps Trackers

Περιγραφή

GSM Specifications

Frequency	Quad band: 850/900/1800/1900 MHz Compliant to GSM phase 2/2+ -Class 4（2W @ 900 MHz） -Class 1（1W @ 1800 MHz）
GPRS	GPRS multi-slot class 10 GPRS mobile station class B
RMS Phase Error	5 deg
Max RF Output Power	GSM850/GSM900: 33.0±2 dBm DCS1800/PCS1900: 30.0±2 dBm
Dynamic Input Range	-15~-108 dBm
Receiver Sensitivity	Class Ⅱ RBER 2% (-107 dBm)
Stability of Frequency	< 2.5 ppm
Max Frequency Error	±0.1 ppm

GNSS Specifications

GNSS Type	u-blox All-in-One GPS receiver
Sensitivity	Autonomous: -147 dBm Hot start: -156 dBm Reacquisition: -160 dBm Tracking: -162 dBm
Position Accuracy (CEP)	Autonomous: < 2.5m SBAS: < 2.0m
TTFF (Open Sky)	Cold start: 27s average Warm start: 27s average Hot start: 1s average

Interfaces

GSM Antenna	Internal only
GPS Antenna	2 built-in GPS antennas at front and rear sides
MMCX Interface	For optional external GPS antenna
LED Indicator	GSM, GPS, PWR (battery status)
Micro USB Interface	Used for battery charging Charged by cigar lighter: 5V, 0.5~2A Charged by adapter: 12V, 2A
Power Button	Used for start-up on only Press at power-on to light up the battery indicator

General Specifications

Dimensions	74mm(L) x 34.5mm(W) x 151mm(H)
Weight	375g
Internal Battery	Li-Polymer, 3.8V, 15000 mAh
Standby Time	Without reporting: 190 days (connected to network with GPS off) 1 minutes’ reporting: 10 days (locate every 20 seconds, GPS on) 5 minutes’ reporting: 65 days 10 minutes’ reporting: 95 days
Water Resistance	IP65 compliant
Operating Temperature	-20~60℃ -30~60℃ for storage
Accelerometer	Internal 3-axis accelerometer
Light Sensors (Optional)	2 internal light sensors 1 for removal alarm, the other for environment light monitoring
Temperature & Humidity Sensor (Optional)	Internal temperature & humidity sensor Temperature range: -30℃ ~ +70℃ Humidity: 1 ~ 99% Rh

Air Interface Protocol

Transmit Protocol	TCP, UDP, SMS
Scheduled Report	Report position and status based on preset time intervals, distance, mileage or a combination of these settings
Motion Detection	Motion detection based on internal 3-axis accelerometer
Removal Alarm (Optional)	Based on internal light sensor (for magnet-mounted version only)
Environmental Light Monitoring (Optional)	Based on internal light sensor and preset optical density value
Temperature & Humidity Measurement (Optional)	Based on internal temperature & humidity sensor